Email cannot be empty
Password cannot be empty
Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
X-T20 Transmitter
The tension transducer converts the millivolt output signal of tension sensors into an analogue or digital signal in real time and provides closed-loop control for PLCs, servo drives, IPCs, and other control systems. The transducer adopts a guide rail-type installation. It can display real-time tension values, and calibration parameters can be set through a hand-held device.
Product Description of X-T20 Transmitter
The X-T20 transmitter is a versatile device designed to convert the millivolt output signal from tension sensors into real-time analogue or digital signals. It provides closed-loop control for various control systems such as PLCs, servo drives, and IPCs.
Product Features and Advantages of X-T20 Transmitter
Analogue and Switching Input/Output: The X-T20 Transmitter supports either two channels of analogueue input/output or one channel of analogueue input/output along with two channels of switching input/output. This flexibility allows for seamless integration with different control systems.
- Reset Function: The transmitter offers multiple options for resetting, including switch input, clear command, and automatic zero clearing when power is applied. This ensures accurate and reliable tension measurements.
- Analogue Transmission: The X-T20 Transmitter supports analogue transmission with a range of 10V±10V or 4-20mA. This enables easy integration with analogue control systems and provides precise tension control.
- Digital Output: The transmitter is equipped with RS232 and RS485 digital output options, allowing for seamless communication with other devices and systems. It supports protocols such as MODBUS-RTU and TC-ASCII for efficient data exchange.
- Wide Transmission Range: The X-T20 transmitter supports a wide transmission range of -100% to +100% full scale (FS). This ensures compatibility with various tension measurement requirements.
The X-T20 transmitter is designed for easy installation with its guide rail-type mounting. It provides a real-time tension value display and allows for calibration parameter settings through a handheld device. The transmitter also supports rapid tension reset and alarm output through its switching input and output nodes.
With support for single- or double-channel signal input and analogue variable output, the X-T20 transmitter is capable of completing tension-closed loop transmission for winding and unwinding processes.
Technical Parameter of X-T20 Transmitter
|
Power supply |
DC24V/5W |
AD resolution |
24 bit |
|
Sensor’s supply voltage |
5VDC,200mA |
Sampling rate |
600-4800 Times/Sec. |
|
Input signal range |
0-20mV |
Transmitting speed |
=Sampling rate |
|
Non-linearity |
0.01%F.S. |
Switch output type & capacity |
NPN/PNP,500mA |
|
Accuracy |
0.5%F.S. |
Switch input type |
NPN |
Dimensions
Selection
|
Model |
Input signal |
Accurancy |
Power supply |
Signal output |
Special requirements |
|
X-T20 |
M:mV DM double:mV |
B:0.05% D:0.1%-0.5% |
D:24VDC |
R2: RS232, R4: RS485, V:0-10V OR ±10V A:4-20mA V2:double 0-10V OR ±10V |
Y/N |
